Описание
![]() | ||
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
WELCOME TO ZPMOTO 'S SHOP
Package: One Pair(Left&Right)
3 COLOR





Clipon Installation Instructions
WARNING Installation and use of some Zpmoto Technologies, Inc. products will change the response of the motorcycle to
rider control inputs. Failure of the rider to adapt to these changes may cause loss of control, and serious injury or death.
Improper installation, and/or failure to comply with all warnings and instructions may cause loss of control and serious injury
or death. DO NOT INSTALL OR USE ANY ZPMOTO TECHNOLOGIES, INC. PRODUCTS IF YOU ARE
UNABLE TO DO SO IN COMPLIANCE WITH ALL INSTRUCTIONS AND WARNINGS. SEEK THE
ASSISTANCE OF AN EXPERIENCED TECHNICIAN.
1) Completely remove your stock grips, controls and clipon assembly.
2) Most OEM controls have anti rotation pins, which require you to drill holes in the handlebars for
proper installation. Measure the diameter of the holes in the stock handlebars and select the
appropriate drill bit.
3) Slide the controls loosely into place, noting that the grips should end right where the plastic end
plug meets the aluminum. Mark the location for the anti rotation pins and drill the holes for them.
Test the control assemblies to be sure that they are able to be securely tightened and that
everything moves freely.
4) Remove the two clamping bolts on each clipon and secure the main clipon body on the fork tube,
finger tight. Install the handlebar and controls into each clipon.
5) Sit on the motorcycle and orient the bars in the position that you are most comfortable. Snug them
in place and then rotate the handlebars lock to lock.
WARNING - VERY IMPORTANT : Ensure that the cables, hoses and all control parts do not contact any part of the
motorcycle and that you have full ability to manipulate the controls throughout the entire range of steering. Also, be sure that
the throttle returns freely after being fully opened throughout the entire range of steering. FAILURE TO HEED THESE
WARNINGS MAY CAUSE LOSS OF CONTROL OF MOTORCYCLE AND SERIOUS INJURY OR DEATH. DO
NOT OPERATE THE MOTORCYCLE IF THERE ARE ANY INTERFERENCE ISSUES WITH EITHER THE
MOTORCYCLE PARTS OR YOUR BODY, OR WITH A THROTTLE THAT DOES NOT RETURN FREELY.
6) Before fully tightening the mounting bolts, you should finger tighten the bolts so that the gap
between the two halves of the clipon is even on both sides. Next, snug all two bolts with a
wrench, then tighten the one forward bolts tight. Then, fully tighten the one rearward bolts.
Perform a final check on the two front bolts to be sure they are securely tight. Finally, tighten the
pinch bolt for the handlebar.
IMPORTANT :
After tightening all fasteners according to instructions, and to industry-standard torque specifications,
attempt to force each unit to slip on fork tube. ANY ABILITY OF CLIP-ON TO SLIP MAY CAUSE LOSS OF
CONTROL OF MOTORCYCLE AND SERIOUS INJURY OR DEATH. DO NOT OPERATE MOTORCYCLE
WITH A SLIPPING CLIP-ON.
We can accept Alipay / Paypal / Western Union / MoneyGram.
Full payment must be made within 15 days of placing your order.
The buyer is responsible for any tax and/or duty charged by their country.
We will ship your order within 24 hours after receiving your verified payment.
We ship the package within 24 hours from China Post Air Mail or Hong Kong Post Air Mail,We ship to Alipay address ONLY. Please make sure your address in Alipay is matched with your shipping address before you pay.We ship worldwide Via AIr-Mail,Delivery time is 8-28 business days. EMS: 5-14 days. DHL/UPS: 3-7 days.
Expedited shipping: Express Mail Service is available. You need to contact us about this service.
Buyers - Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

If you feel disappointed with the item, tell us within 7 days of delivery. Items must be returned in original condition for refund or exchange. Shipping cost incurred is on you. We understand the frustrations you might have, please contact us before opening any dispute or leaving any neutral/ negative feedback. We care about each buyer and will do our endeavor to fix any problem in a good business manner. Your satisfaction is always our NO.1 priority.
If you are satisfied with our items, please leave us positive feedback. Once you leave positive feedback, our system will give you positive feedback at the same day.
Please contact us before leaving any negative and neutral feedback. We will work with you to solve any problems.
If you are satisfied with our items, please leave us positive feedback. Once you leave positive feedback, our system will give you positive feedback at the same day.
Please contact us before leaving any negative and neutral feedback. We will work with you to solve any problems.

ZPMOTO Motorcycle Parts & Accessories Development Co.,Ltd is a leading manufacturer and exporter which is concerned with the design, development and production of motorcycle parts and accessories. We are located in Guangzhou, which near Hong Kong with the most convenient transportation access of air express and ocean carriage in the world. All of our parts comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future And if you order in big quantity. please contact with us. Wholesale is welcome. Big Quantity, Better Price.

1.We located in Guangzhou, the largest electronics market of China. We have the unique geographical advantages and the prosperity of foreign trade. We offers a huge number of electronic business from all over the world.
2. You pay the FACTORY PRICE!
We sell brand new items directly from factory in Asia. That is why our prices are so competitive.
To maintain quality control we do personally inspect for each item prior to shipment. All items are 100% new and inspected.
3. All Emails will be answered within 24 hours.
Please leave a message in the Trade Manager. If you do not receive our reply, please kindly re-sent your email and we will reply you as soon as possible.
Thank you for your attention
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() |
Характеристики
- Тип товара
- Сжатия
- Название Модели
- CLIP ONS
- Высота Изделия
- 3.85cm
- Тип материала
- CNC Aluminium alloy
- Диаметр Изделия
- 30cm
- Бренд
- DTRAD
- Ширина Изделия
- 8.5cm
- Вес товара
- 0.6kg
- Длина товара
- 29.5cm