XH-W1411 220V Цифровой Контроль температуры; трех окон Дисплей мульти-Функция Контроль температуры переключатель

This product uses single-chip control system + high-precision temperature probe, temperature control performance and temperature control accuracy is superior to similar products. This product three windows design, start value and stop value real-time display, and with intermittent work, timer switch machine and other functions, in the greenhouse cultivation, aquatic animal husbandry, room temperature control can be widely used, it is a good helper at home!
use: 1, the product of the plug plug in the home socket on the screen shows the temperature that the power has been properly connected 2, the temperature control probe into the need to control the temperature of the place, according to the need to set the start and stop temperature 3, the heating or cooling equipment power plug plug in the thermostat socket can be achieved on the temperature control
the operating instructions: If the temperature is in the interval after power-up, the output will be activated immediately and the set value will be stopped. Start temperature Less than stop temperature: heating mode . For example, want to control the hot water to 60 degrees to stop, to 45 degrees and then start, then the start value should be 45, stop the value of 60. Start temperatureGreater than Stop temperature: Cooling mode
For example, when the summer wants to control the greenhouse above 35 degrees to start the ventilation fan, when to stop at 32 degrees, then the start should be set to 35, stop setting to 32. SET: function key / switch key . In the boot state, press and hold SET 3 seconds to shut down, if the power off after the shutdown is still kept off
In the shutdown state, press SET once to boot, boot if the power is still turned on Press the SET once to switch between F-1 and F-3 in the normal temperature control state . F-1 Intermittent Operating Mode Unit Minute Left Start Minute RightStop Minute . F-2 timer off the left hour the right minute minutes up to 99 hours 59 minutes . F-3 regular boot left hour right minute minutes up to 99 hours 59 minutes
Colour: Black
Material: ABS
Temperature correction: unplug the thermostat plug and hold the SET power on, enter the temperature correction function, the screen display --000 - can be corrected before the temperature on the basis of addition and subtraction temperature, the maximum range of -9.9 ~ +99, calibration completed Rear. Real-time temperature = pre-correction temperature value + correction value. Press and hold (start + -) to enter the self test function. Press and hold (stop + -) to turn on the factory settings
Product Name: High Precision Digital Thermostat
Specifications Model: XH-W1411
Temperature range: -55 ~ +120 °
Temperature measurement accuracy: ± 0.3 °
Resolution: 0.1 °
Temperature range: -19 ~ 99 °
Control accuracy: 1 °
Temperature probe: 1 meter waterproof probe
Supply voltage: 220V
Applicable environment: -25 ~ 55 degrees Humidity 20% -85% (no condensation)
Output type: 10A Relay output
to restore the factory:
If you set the error or set the confusion can hold down the stop 2 keys to start the factory settings
Screen display 88-888-88, buzzer flute soon, recovery is complete
Package Contents:
1*Temperature Controller
1*Probe line
1*acrylic board
1*sticker
1*screw
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.